Axial SCX10III Jeep JLU Kit Build Series - Part 6 Addendum - Detailing and Electronics

While I was painting up the body, I decided to get some detailing and electronics wiring done.

Went back and detailed up the motor cover a little bit.

Also wired up the BEC

Soldering the leads to the XT60 connector

Pulled back the XT60 sleeve from the Hobbywing 1080 to solder.

After soldering, just slide the sleeve right back over.

Using a Gearhead RC RX Bypass. Makes things easy.

Used 3M Fabric tape to bundle up the BEC wiring.